Technor EVF-P Series

Overview

EVF-P lighting fixtures are manufactured with an high resistance cylindrical polycarbonate lamp housing and with end cups made of corrosion resistant copper free aluminium. Polycarbonate lamp housing is a three layers-extrusion UV resistant able to grant the best protection against sun rays and related yellowing effect.
Circular shape grants the best possible “CX” factor, therefore it is less affected by winddusts, no flat surfaces to avoid pollution and dirty bunching.
Components and design make EVF-P lighting fixtures suitable for high corrosion environments.
To increase further surface protection, upon request it is possible to apply an OFFSHORE painting cycle suitable for marine environments.
All lighting fixtures are supplied ready for LOOP IN-LOOP OUT facility with 4sqmm cable.

Bildunterschrift

Technical Details

Model EVF-P
Light source EVF-P series lighting fixtures are suitable for two pins fluorescent lamps G13 socket Philips
TL-D or equivalent (lamps excluded)
Housing End cups in aluminium with low content of copper
Light housing in polycarbonate
AISI304 Stainless steel screws
Housing colour End cups painted by green colour polyurethane painting cycle RAL6003 (other colour available upon request)
IP Rating IP66
Emergency version Available EVF-P lighting fixtures for emergency service of one tube:
- 90 minutes; guarantees 60’ duration with constant flux (emergency lumen factor 18%) and
30’ with decreasing flux
- 120 minutes (emergency lumen factor 9%)
- 180 minutes; constant flux (emergency lumen factor 9%)
Ambient temperature -20 °C up to +55 °C
Voltage range 230 Vac
Systempower 1x 18W or 2x 18W or
1x 36W or 2x 36W or
1x 58W or 2x 58W
Power factor/Cos >0.95
Ballast High frequency electronic ballast conforming with EN 60079 – 15 and IEC 60079 – 15
Gaskets O-ring made of Nitrile Rubber (NBR)
Entries N° 2 entries M20x1,5. One plugged-off by Ex-d brass nickel chrome plated plug and relevant gasket.

Certificate Details

Model EVF-P
ATEX classification Group II, Category 2, Gas and Dust
Area classification Category 2 (Zone 1 and 21)
Certificate (ATEX) INERIS 02ATEX0039
Certificate (GOST R) marking upon request, ordering code to be required
Marking II 2 GD
Ex-de IIC T4 Gb
Ex-tb IIIC T85°C Db IP66
CE Yes

Optional

Model EVF-P
Pole mounting kit (AISI304) On request
Ceiling/Wall mounting kit (AISI304) On request
Suspension mounting kit (AISI304) On request
protection guard (AISI304) On request
3° bottom entry M20x1,5 On request
Mounting kit in stainless steel ASI-316 On request