ILED Aquarius CIRCLE-H Helideck Lighting System
Helicopter deck signalisation lighting has now taken off into a new direction with the IMT CIRCLE-H Lighting System.
Throughout the industry, it is now fully agreed and accepted that the old method of illuminating the TD/PM Circle and H with flood lights results in the common dangerous problem of creating the disorientating ‘black hole’ effect and at the same time being a source of glare to the helicopter pilots.
Developed with close guidance from the CAA and in full accordance with the requirements of CAP437, IMT’s CIRCLE-H TD/PM Lighting System provides the optimum solution to these problems.
Cleanly and clearly indicating the TD/PM Circle and H, the IMT CIRCLE-H is the only fully certified system of its type – providing optimised safety – without compromise.
The unique integrated mounting plate is able to be customised to suit specific requirements and with a choice of fixing and installation methods to suit all deck types, the CIRCLE-H can be installed as a stand-alone system or as a fully integrated total helideck lighting and status light safety system solution.
IMT understand and fully appreciate that it is not merely about the CIRCLE-H system – but just as – if not more importantly – that it is installed correctly and proficiently. Therefore, IMT have teamed up with selected partners so as to be able to carry out pre installation surveys of helidecks – these surveys and inspections are carried out by fully certified and competent personnel. When installation is taking place off-shore and where the helideck is positioned such that working conditions are liable to be extreme and exacting, then our approved survey and install teams have the following base skill sets as an absolute minimum:
- Offshore medical
- IMT approved intallerstatus
- Mechanical fixing approved installer status
- IRATA rope access accreditation lead by a level 3 accredited team member
- Helideck landing area awareness
With regard to “new build and yard” installation – then the necessity for an extreme working conditions trained and fully certified install team is lessened somewhat. So, whatever your install requirements are, be it off-shore, yard, full turnkey or supervised, then IMT has the solution to best fit your needs and legal requirements.
In preparation for installation and to ensure that all issues relating to correct compliance of CAP437, ICAO Annexe 14 and IMO MODU are covered and adhered to, IMT can offer a comprehensive and extensive on-site helideck survey and report service. If you would like further information and advice as to how we can help you in the process of pre-qualifying and preparation for CIRCLE-H installation, then please contact us.
The light characteristics of the CIRCLE-H system are designed in compliance with CAP 437 so that the location of the helideck on the platform is easier to establish and increases its conspicuity. In line with CAP 437 requirements, our CIRCLE-H system has being independently tested and certified – by DEKRA – Attestation of Conformity No: 2168390.01 AOC.
CIRCLE-H is less than 25 mm high, even with the mounting plate. The system is comprised of just 4 main parts. The light unit is easily connected by an Ex-certified, patented plug system. Only cables and conduits are variable – to the D-Value of the helideck.
IMT’s CIRCLE-H system is manufactured from marine grade aluminium – which is by far and away the best material for marine applications and for temperature management control. The one-piece mounting plate is designed so that it can easily be adapted to suit all types of deck construction.
Unique Technical Points
- DEKRA LIGHT CERTIFICATE
- Fitted in place – including mounting plate – less than 25 mm
- Certified to IP66/67
- Ambient Temperature Range of -30°C to +55°C
- Machined Marine Grade Aluminium – no mixing of plastic and steel materials
- Unique ‘interlock’ design to withstand impact shear forces • Light intensity adjustable – Full control by communication
- Can be fully integrated with Helideck Status Light Systems
- Only 4 parts, only variable parts are cable covers and cables
- Easy connection by plug system
- Different fixing methods – to suit all helideck types
- Easy to replace fixtures
- ATEX and IECEx Zone 1 certified • Low power consumption
- Special anti slip coating
|Luminous intensity||Standard and bright setting|
|Light colour||Green and Amber|
|Horizontal emission||According to CAP 437|
|Housing||Marine Grade Aluminium with a special anti-slip coating|
|Housing colour||RAL 9003 Signal White or
RAL BS 4800 – 10.E.53 Sun Flower Yellow
|Lens||PC protected against UV light|
|Ambient temperature||-30 °C up to +55 °C|
|Burning position||Base Down|
|Voltage range||24 Vdc ± 10 % and 90 – 255 Vac|
|Average power for a complete system||Approx. 175 W in bright setting (Depending on size D-value/system requirements)|
|IEC protection classes||Class 1|
|Connection||Special explosion proof plug system|
|Weight per piece||± 3 kg|
|Package weight||Dependent on system type and configuration|
|Package size (LxWxH)||Dependent on system type and configuration|
|ATEX classification||Group II, Category 2, Gas|
|Area classification||Category 2 (Zone 1)|
|Certificate (ATEX)||DEKRA 13ATEX0173|
|Certificate (IECEx)||IECEx DEK 13.0059|
|Marking||Ex II 2 G Ex e mb IIB T4 Gb
Ex e mb IIB T4 Gb
|Light distribution attestation||2168390 AOC|
|± 3 kg|
|± 3 kg|
ABS 14-LD1187803-PDA 2014
Downloads: 1336 (1.3 MiB)
CAA declatration 2014
Downloads: 624 (278.4 KiB)
CAP 437 2168390-01AOC 2014.PDF
Downloads: 1043 (2.5 MiB)
Downloads: 0 (0.0 Byte)
Downloads: 110 (2.3 MiB)
DEKRA 13ATEX0173 2014
Downloads: 1061 (988.5 KiB)
IECEx DEK 13-0059 2014
Downloads: 1307 (1.0 MiB)
IECEx DEK 13.0059 Iss1
Downloads: 100 (783.7 KiB)
IMT CIRCLE-H DECL DNV-GL N1403EBF 2015
Downloads: 617 (164.1 KiB)
IMT CIRCLE H
Downloads: 545 (788.8 KiB)
IMT ILED Aquarius CIRCLE-H
Downloads: 1513 (2.2 MiB)